Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across University Heights
Duct repair and sealing in University Heights almost always starts with a complaint, not a remodel: dust streaking at a register, a musty smell when the heat comes on, one apartment that never gets warm. We work on that reality every week. The buildings here are dense pre-war brick apartment houses and attached rowhouses along University Avenue and Burnside Avenue, and the ductwork inside them is shared, original, and often several apartments deep. Our technicians have up to 15 years of experience tracking down where a chase is leaking and sealing it properly. Call (855) 947-0512 for a free estimate.
Key takeaways: Most University Heights duct problems live in shared vertical chases, not single apartments. Sealing is usually a building-wide decision made by a management company or co-op board. We inspect with a camera, confirm leaks under negative pressure, and document the work so sign-off is straightforward.
Why University Heights Homeowners and Property Managers Call Air Duct Cleaning Concourse for Duct Repair & Sealing
We’re an indoor-air specialist, not a general HVAC company that adds ducts to a checklist. That matters in University Heights, where the equipment has to handle a full vertical stack rather than one short branch run. Our crews run professional-grade Rotobrush and Nikro systems and carry Abatement Technologies air filtration equipment, which is remediation-level capability you rarely see from a residential-only cleaner.
We repair what we find. If the inspection turns up separated seams in an original galvanized trunk behind a kitchen soffit, we fix it in the same visit instead of handing you a report and a second contractor’s number. Duct cleaning, repair, sealing, sanitizing, and dryer vent work all sit under one roof.
Response into University Heights is quick. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. That schedule matters when a management company needs a technician in the building while the super is on site.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in University Heights
Duct Sealing
Sealing is the core of most University Heights jobs because the leaks are structural, not cosmetic. In pre-war brick buildings, the original galvanized supply and return ducts in a shared chase separate at seams and joints over decades, pushing heated air into the wall cavity instead of the upper-floor registers. We confirm the leaks under negative pressure with HEPA filtration running, then seal what’s accessible with mastic so the fix holds.

Metal Duct Repair
The rectangular sheet-metal chases serving stacked apartments take a beating from vibration, settling, and prior patchwork. We repair collapsed sections, reattach separated joints, and rebuild connections where an old trunk has pulled apart. In a building where one basement or rooftop air handler feeds a whole stack, a single failed joint upstream can starve several apartments at once.

Flex Duct Repair
Flex duct spliced into an older metal trunk behind a bathroom or kitchen soffit is a common find in University Heights, and it crushes easily. A pinched run cuts airflow to every register downstream. We replace damaged sections and reconnect them properly so the trunk and the flex run work as one system.

Duct Insulation
Uninsulated chases in these buildings sweat in humid weather and lose heat in the cold months, which is how condensation and dust buildup start. Adding insulation to accessible runs cuts that cycle and keeps the air reaching upper floors closer to the temperature it left the unit at. It’s often the piece that makes a sealing job actually stick.
Trusted Brands We Service in University Heights
We install and work with Honeywell and Aprilaire air-quality products, which bridges the gap between a cleaning job and ongoing indoor air management. Abatement Technologies filtration equipment and Guardsman products round out the sanitizing side. We don’t claim to stock parts for these brands or keep a warehouse in the neighborhood; what we do is specify the right components, source them quickly, and get a repair turned around without a long wait. If your building already runs Honeywell controls, we work with what’s there rather than ripping it out.
Common Duct Repair & Sealing Problems We See in University Heights Homes
- Seam and joint separation in original galvanized ducts. Decades of heating cycles pull the joints apart inside the shared vertical chase, so heated air leaks into wall cavities instead of reaching upper-floor registers. The symptom tenants notice first is uneven heat and dust at the grilles.
- Crushed or disconnected flex duct behind soffits. Older metal trunks often have flex runs spliced in during a past renovation, and those runs get pinched or come loose. Downstream registers lose airflow and the apartment feels starved even when the handler is running hard.
- Deteriorated interior duct liner and loose grilles. Liner original to a 1910s to 1930s building breaks down and sheds debris into a stack that feeds several apartments. Loose grilles add to it, dropping dust and lint straight into the airstream.
- Pest and lint debris in shared chases. The Bronx’s cold, humid winters and hot summers push condensation through uninsulated chases, and that damp debris collects in the same vertical runs. Fall and winter furnace start-up is when residents notice the musty odor most.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in University Heights, NY
Pricing is set per job by a written estimate, so there’s one flat price agreed before any work starts. Typical ranges for University Heights:
| Service | Typical estimate |
|---|---|
| Targeted duct sealing (accessible runs, one apartment) | $350 – $900 |
| Mastic sealing of a shared vertical chase (per floor section) | $450 – $1,200 |
| Metal duct repair (collapsed or separated section) | $300 – $850 |
| Flex duct repair or replacement (per run) | $200 – $600 |
| Duct insulation (accessible runs) | $400 – $1,100 |
| Building-wide scope with documentation for management sign-off | Quoted after inspection |
What pushes a job toward the high end is access: a chase that needs opening behind plaster, a rooftop handler, or a stack serving four or more apartments. Because most University Heights work is building-wide, the written estimate covers the full scope after inspection so a management company or co-op board can approve it in one pass. Estimates are free.
We Also Serve Cities Near University Heights
Our work reaches well beyond University Heights. We also cover Highbridge, Morrisania, Concourse, and Longwood, which share the same pre-war building stock and the same shared-chase duct problems. If your building sits near a boundary between neighborhoods, call and we’ll confirm coverage before scheduling. Reach our duct repair & sealing team at (855) 947-0512.
Serving University Heights, NY – Our Local Coverage Area
We serve University Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in University Heights
Yes, in most cases. We isolate the affected chase section and run HEPA filtration while we work, then restore service before moving to the next section. In a building where one rooftop or basement unit feeds a whole stack, work is staged floor by floor so residents aren’t without heat or cooling for the full job. Call (855) 947-0512 to schedule an inspection – estimates are free.
A camera inspection of the shared chase is the only reliable way to tell. If the separation is in the original galvanized ducts inside the vertical chase, the problem is building-wide and every apartment on the stack is affected. If it’s a crushed flex run behind your own soffit, it’s isolated. Call (855) 947-0512 for an inspection – estimates are free.
We confirm the leaks under negative pressure with HEPA filtration running, then seal the accessible joints with mastic sealant. Where a rectangular sheet-metal chase has separated at seams, we repair the metal first and seal after, so the fix holds through the next heating season. In a typical University Heights pre-war building, the technician documents each sealed joint so the management company can sign off on a building-wide scope. Call (855) 947-0512 to book an inspection.
Yes. Dryer vents that pass through a shared stack are a named part of our service, not an add-on, and they’re a real fire concern in dense multi-unit buildings. We clear and repair the run, check the exterior termination, and flag any crushed or disconnected sections we find along the way. Call (855) 947-0512 – estimates are free.
We coordinate with the building’s management company or super to set access windows and stage the work so tenants stay informed. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, covers the usual building day. Scheduling depends on how many units we’re entering, but we book the inspection first and confirm the full scope from there. Call (855) 947-0512.
Book a Duct Repair & Sealing Estimate in University Heights
If your registers are dust-streaked, a room never heats properly, or your building’s chase has separated at the seams, we can inspect and give you a written scope. We work with management companies and co-op boards on building-wide jobs as readily as with individual apartment owners. Call (855) 947-0512 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Concourse.