Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Melrose, NY
We provide independent Lennox service across Melrose, NY – cleaning, repairing, and sealing ductwork connected to Lennox furnaces, heat pumps, evaporator coils, and blower assemblies in the neighborhood’s pre-war walk-ups and apartment blocks. What makes our Lennox work in Melrose different is that we treat shared masonry exhaust shafts, closet-mounted furnaces, and aftermarket AC retrofits as the actual job, not a footnote. Not every Lennox job here looks like a suburban trunk-and-branch system, and we plan accordingly. Call (855) 947-0512. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Melrose Residents Choose Us for Lennox Service
Lennox residential equipment has specific airflow paths, coil layouts, and blower designs. Cleaning ductwork or a blower without understanding how a given Lennox furnace or heat pump moves air risks leaving the parts that matter most untouched. Our technicians work on Lennox systems regularly and know which components on a Merit Series furnace, an Elite Series furnace, or a Dave Lennox Signature Collection unit respond well to cleaning and which need inspection before anything gets touched.
We repair, install, and service Lennox equipment using quality parts that fit it – OEM parts for critical components like heat exchangers and control boards, and high-quality aftermarket parts for blower wheels and filters when they meet or exceed the original specs. We’re an independent Lennox service provider, not manufacturer-affiliated or authorized. That means no brand script, just an honest read on what the equipment needs.
Scheduling in Melrose is straightforward: call, describe what you’re seeing, and we’ll book a time. If the work touches shared shafts or common areas, we’ll tell you up front so you can loop in the building super. Call (855) 947-0512 for a free estimate.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Melrose
These are the Lennox issues that show up repeatedly in Melrose buildings, tied to how this neighborhood’s housing and weather actually interact with the equipment.
- Dust-packed blower wheels on Merit Series furnaces. The PSC blowers on Merit Series furnaces like the ML180 and ML195 collect dust on the wheel over time, which cuts airflow and can cause overheating. In Melrose’s humid summers, that heat stays trapped in small utility closets, so a clogged wheel has less margin before the system starts complaining.
- ECM control module faults that look like duct problems. Elite Series furnaces with ECM blowers (EL180, EL295) can have a failed control module that mimics restricted ductwork – weak airflow, uneven comfort. It’s an electrical fault, not a duct one, and cleaning alone won’t fix it. We test before we clean so you’re not paying for the wrong service.
- Clogged evaporator coils on Lennox units in aftermarket wall or window AC retrofits. These coils clog with lint and mold quickly, because the shared risers in pre-war buildings push dust into every unit on the stack.
- Cracked heat exchangers in older Lennox furnaces. Years of heating through cold, damp Bronx winters stress heat exchangers on older units, and a crack means carbon monoxide can enter the airstream. This is a safety issue, not a cleaning one – we inspect carefully and tell you plainly what we find.
- Soot and lint loading from the shared exhaust shaft. Exhaust risers that vent dryer lint from multiple units build up over time, and that loading affects Lennox components in every unit connected to the stack.
Lennox Service in Melrose: What Local Conditions Mean for Your Equipment
Here’s the part that separates a real Lennox job in Melrose from a generic duct cleaning. In Melrose’s pre-war walk-ups along the streets feeding into the Major Deegan corridor, Lennox furnaces are often retrofitted into closet spaces with minimal clearance. That makes heat exchanger cleaning and inspection genuinely difficult – technicians have to work around the cabinet, the coil, and the return path with almost no room, all while navigating shared masonry shafts that also vent dryer lint from multiple units. A cracked or dust-coated heat exchanger on a Lennox furnace in one of these closets is easy to miss during a quick walkthrough, and easy to catch when someone actually disassembles and looks. The soot layer that trucks along the Major Deegan add to the neighborhood’s air makes this worse: it settles into returns, coats coils, and adds to the lint load already flowing through the shaft. If your Lennox system lives in a tight utility closet in one of these buildings, plan for a slower, more careful inspection than you’d expect elsewhere.
Lennox Models & Products We Service in Melrose
We service the Lennox equipment you’ll actually find running in Melrose apartments and walk-ups: Merit Series furnaces, Elite Series furnaces, Dave Lennox Signature Collection high-efficiency units, and Lennox heat pumps. We clean heat exchangers, evaporator coils, and blower assemblies on all of them, and we integrate the cleaning with ductwork so airflow is measured properly afterward.
Parts selection follows the equipment, not the other way around. Critical safety components like heat exchangers and control boards get OEM Lennox parts. Blower wheels and filters can use quality aftermarket parts when they meet or exceed OEM specs. If we can’t source a part that meets the standard, we say so and outline options. We’re independent, so the recommendation follows the system, not a brand agreement. Call (855) 947-0512 to discuss your Lennox model and what it needs.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Melrose
Lennox duct cleaning, coil cleaning, and blower service in Melrose are priced per job by written estimate after we’ve seen the system. Whole-system duct cleaning typically runs from $450 to $900 depending on the number of runs, the length of the system, and how accessible the closets and shafts are. Evaporator coil cleaning is typically $180 to $350. Blower removal and cleaning is typically $150 to $280. Heat exchanger inspection often runs $120 to $250 depending on access.
What drives cost in Melrose specifically: closet access, whether the shaft needs coordinating with a super, and whether the problem turns out to be a duct issue or a component failure that shows up during cleaning. The free estimate covers the visual inspection, an airflow check, and a written scope before any work starts. Call (855) 947-0512 for your estimate.
Serving Melrose, NY – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Melrose
Yes, it could be. In pre-war Melrose buildings, shared masonry shafts vent exhaust from multiple units, and lint or soot loading in the shaft can restrict airflow and cause short-cycling on the connected Lennox furnace. A clogged blower wheel and dust-coated heat exchanger often show up together as well. We inspect both before recommending anything.
Once a year is reasonable in Melrose, and more often if your Lennox evaporator coil sits in an aftermarket wall or window AC retrofit in a pre-war building. The shared risers push lint and mold spores into these units quickly, and the humidity encourages growth on the coil face.
Usually, yes – cleaning and inspection can be done in place on an Elite Series heat exchanger, though tight closet installs in Melrose walk-ups make it slower work. If we find a crack during inspection, we stop and tell you; a cracked heat exchanger is a safety issue and can’t be cleaned back into service.
Soot from the Major Deegan corridor settles on condenser coils and outdoor units over time, which cuts heat transfer and strains the compressor. We inspect outdoor units during heat-pump service and clean coils when the buildup is meaningful. Indoor airflow work should follow if ductwork has pulled soot into the returns.
Not special filters – the right filter for the furnace’s rated airflow. In tight Melrose closets, a filter that’s too restrictive chokes the blower and can mimic a duct problem. We match the filter to the Lennox system’s specs and check that airflow is correct after any cleaning. Call (855) 947-0512 for a free estimate.
Service Areas Near Melrose
We work across the South Bronx and into the surrounding neighborhoods and towns. If you’re just up the road, we can help: Melrose sits alongside Concourse, Mott Haven, and the Pelham area, and we reach into Mount Vernon and Pelham Manor too. For Lennox work specifically, we also cover nearby Mott Haven and Longwood. If you’re not sure whether we reach your street, call and ask.
Book Your Lennox Service in Melrose Today
If your Lennox furnace, heat pump, or ductwork needs attention, we’re ready to take a look. For a wider view of the brand, see our Lennox overview page. Call (855) 947-0512 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Concourse.